Gehmann #565-579 CLS system Combo
$480.00 CAD
Threaded for standard target rearsights
Removable steel thread allows retro-fitting of our 50309 magnifying diopter (-4.5 to +4.5)
Locking collar allows precise location of the V-mark
Laser engraved indications
Two polarisation filters
1. ring eliminates glare and controls white round target
2. ring (with lugs) controls light through the sight
Filters (filter and polariser) can be used together or one at a time
Adjustable iris made to our latest patent covering the range 0.5mm to 3.0mm
Internal surfaces are matt black reducing light reflection to a minimum
Matt finish to eliminate reflected light and subsequently distortion of the sight picture
Six optically flat glass colour filters which can be precisely located in position, colours:
Orange, light green, yellow, medium grey, dark grey and amethyst
Clear settings at either end of the adjustment range for use of iris only or polarisation only
579 Cylindrical lens system, 0-2% Sphere
Until now shooters suffering from astigmatism have been obliged to use shooter’s spectacle frames with their inability to adapt to constant changes in eyesight whether it be day to day or even hour by hour. Subsequently large number of shooters stop shooting as a result due to poor scores and frustration – but not any more.
Opthalmic examination will accurately measure and diagnose your symptoms giving an opportunity to do something about them. If you suffer from the common problems of myopia (short-sightedness), hypermetropia (long-sightedness) or astigmatism – we can cure them all with the use of 570-579 as an example (see page 15).
The device is a combination of optical correction for both axis and astigmatic problems. Axis is set against the rim markings 0 – 180° then locked in place with three allen screws. Sphere is set by use of the two levers which are used in matched but opposing movements for day to day eyesight needs. Depending on levels of eye fatigue, sugar levels etc., your eye sight can change, but with a simple click of the levers, perfect focus can be obtained once again.
We offer two options: 579 0 – 2% (involves 90% of sufferers statistically). 579-4 0 – 4% (involves 2 – 6% of sufferers statistically) To fit either is extremely simple but requires partial dismantling of your iris using the U-spanner originally supplied. A replacement can be ordered if needed. Fitting requires one of our adaptors so please look at the list of our products together with the illustrations below. The adaptor slides inside 579`s body and locked into place with three small allen screws. Each adaptor is internally threaded to allow the 579 to be fitted on your iris. This is done using your existing irises front thread – except 500, 501MC, 510 and 510-S which require 577 due to construction method. If attaching to a straightforward iris (as 550) there is nothing to do – however if you wish greater sight correction then 50309 (black) or 50300MC (silver) diopter is required. Fitting to our unit with existing diopter, procedure is straightforward as described above. Assembly and user manual are included.
According to the DSB rules approved without restriction for DSB (German Shooting Sports Federation).
